Page 106 - RoboCilindri, RCP4, robocilindri, sinta,

OptionsRCP6 Series OptionsBrakeOption Code B Applicable Models All ModelsDescription This is a holding mechanism that prevents the slider from falling and damaging any attached ttings when the power orservo is turned o .Cable Exit DirectionOption Code DescriptionCJT / CJR / CJL / CJB / CJO Applicable Models All ModelsThis option allows you to change the exit direction of the motor-encoder cable to top, bottom, left, or right.Double-block GuideOption Code DescriptionDB Applicable Models RCP6(S)-TA4/TA6/TA7This option allows the actuator to equip 2 internal guide blocks.The dynamic allowable load moment in the Ma and Mb directions will be increased, and when horizontally mounted, its payload will be doubled.Tip Adapter (Flange)Coupled Motor TypeLeft (Code: CJL)* When viewed from the actuator rear side (motor side).Top (Code: CJT)Bottom (Code: CJB)Right (Code: CJR)Side-mounted Motor Type* When viewed from the actuator front side.Outside (Code: CJO)Option Code FFA Applicable Models RCP6(S)-RRA4/RRA6/RRA7 Description A rod-end tooling adapter with 4 threaded holes.For RCP6(S)-RRA4Model Number: RCP6-FFA-RRA4 Referenceφ3 countersinking (Reference side mark)For RCP6(S)-RRA6Model Number: RCP6-FFA-RRA6Reference surfaceφ3 countersinking (Reference side mark)49.5 (home position) 29Flange A35.5±0.826±0.846 3.5 6436 1 5067.5±0.851±0.8+0.012 6H7 0+0.012 5H7 033±0.336 8 5058±0.8+0.012 5H7 0φ5H7Line through the φ5 hole+0.01236f 0.1AFlange Bcenter and oblong hole center f 0.15ABase reference surface 5.5±0.8S(φ5 hole position)Flange Aφ3 countersinking (Reference side mark)564.5 (home position) 39.6Base reference surface 3.5±0.8Reference49.5 (home position) 29Referencesurface 504-M6 depth 13 Oblong hole depth 8f 0.1AFlange Bsurface 0 depth 822 5+0.012φ5H7 0 depth 8Line through the φ5 hole center and oblong hole centerf 0.1A3622 5For RCP6(S)-RRA7Model Number: RCP6-FFA-RRA7Reference surface+0.012φ6H7 0 depth 8Line through the φ6 hole center and oblong hole center64 46Reference surface 8Detail view of S4-M8 depth 17 Oblong hole depth 8f 0.15A Base reference surfaceFlange BFlange A105 Options2±0.8 11±0.8 (φ6 hole position)A66Detail view of SDetail view of S 4-M6 depth 1350 Oblong hole depth 851.5±0.8A10.5±0.8 (φ5 hole position)SASsurface(2-R2.5)(2-R2.5)(2-R3)30 f 0.1A5