Page 40 - RoboCilindri, RCP5, robocilindri, sinta,

Controller <PCON-CA/CFA> RCP5seriesRCP5/RCP4 <PowerCon Type> RCP3/RCP2 Position Controllers1 Built-in high-output driver designed exclusively for RCP5/RCP4 generates greater torque at high speedThe newly developed high-output driver (patentAcceleration/ decelerationMaximum speedRCP2 0.7GRCP51.0GRCP2 1000mm/s1.4 times1.5 timescompared to conventional models (RCP2 series), with the acceleration/deceleration higher by 1.4 times, maximum speed by 1.5 times, and payload twice as large.(*) The rates of improvement vary depending on the type.(*) The RCP3/RCP2 are also supported.2 Supporting the battery-less absolute encoderThe RCP5 equipped with a battery-less absolute encoder is supported. Since no battery is needed to retain position data, less space is needed to install the control panel, which in turn leads to lower cost of your equipment.3 Common boards ensures greater ease of maintenanceWhile conventional controllers require a separate set of boards for each actuator, the PCON-CA/CFA use common boards for all actuators, meaning that actuators of different models such as RCP5, RCP4, RCP3 and RCP2 can be operated simply by changing the controller settings.The result is significant reduction in maintenance stock.4 Smart tuning function, maintenanceinformation, calendar functionThe takt time minimization function sets an optimal acceleration/deceleration rate according to the load that is available (*). You can also record the number of times the actuator has moved and the distance that it has travelled, for use in maintenance.(*) You need PC software Ver. 8.03.00.00 or later or a CON-PTA (teaching pendant) to use thetakt time minimization function.Payload39RCP5 1440mm/sRCP2 6kgRCP5 12kg2 times